KI Kirchgaesser微波接收發射器、微波放大器、微粒測

簡單介紹 KI Kirchgaesser流量傳感器，壓力傳感器，溫度傳感器，液位傳感器以及微波探測器及光柵等

Kirchgaesser的詳細介紹
德國
Kirchgaesser公司一直致力于創新研發、制造高質量的用于采礦及其他工業領域的防爆測量裝置，產品具有*的精度和可靠性，使用壽命長，免維護，尤其在苛刻的工況中占據著歐洲主要的*。
具體產品有流量傳感器，壓力傳感器，溫度傳感器，液位傳感器以及微波探測器及光柵等。
優勢提供德國Kirchgaesser傳感器、微波探測器、微波發射器、微波接收器、微波放大器、微粒測量儀、微波接收發射器、礦用流量計、限位開關、信號放大器、流量計、溫度計、液位計、物位計、測量系統、檢測器
監控儀、、、。詳情請我公司。  

   l        取得 ATEX 1/2 D 認證 
微波接收發射器（微波探測器）： FQR50 / FDR50 、R 11/2- OR 11/2"
微波放大器： FTR 325、FQR 50 / FDR 50   
微粒測量儀：PARTIMEX、（PARTIMEX-SRM）、（PARTIMEX-SRM）
遠程運算器 （PARTIMEX-A*） MARKING: I M1 EEX IA I （ 01 ATEX E 167）
礦用流量計：MIDEX
 
Kirchgaesser代表型號有：MIDEX、MIKRO-/MINIMIDEX-A MIT
MXR、MID-EX-E、MIKRO-/MINIMIDEX-E、MIKRO-/MINIMIDEX-E2、MULTIMIDEX、PEMEX-E、PEMEX-LC、TEMEX、RASOMEX、UMINEX、BRUNNENSYSTEM
PEMEX-BS、ULTRAMEX、FLUWEX-A MIT MXR、PARTIMEX、SOLWEX20、MESS-SYSTEM
SYMEX、AQUACONEX、FDR 50 / FQR 50、FDR 50 / FQR 50
（EDELSTAHLAUSFüHRUNG）、SCHALTVERST?RKER FTR 325、KüHLWASSER-STEUERGER?T
AQUACONEX、MID-EX-E、、、
Magnetic-inductive flow meter
      MIDEX

        Digital local display
        Max. 8 signal outputs e.g. frequency 5 - 15 Hz
        Refrigeration capacity measurement （up to 20,000 kW）
        Nominal width: DN50 to DN300
        Nominal pressure: PN10 to PN500
        Measuring range: max. 2000 m³/h and 1000 l/min respectively

      MIKRO-/MINIMIDEX-A with MXR

        Evaluation unit with remote transducer
        Max. 2 signal outputs e.g. frequency 5 - 15 Hz
        Nominal width: DN10 to DN31
        Nominal pressure: PN100 to PN500
        Measuring range: max. 800 l/min

      MID-EX-E

        Compact and robust flow meter with optional integrated pressure
        measurement
        Replaces older flow meters MIKRO-/MINIMIDEX-E/-E2
        Signal outputs: frequency, limit, current or voltage
        Nominal width: DN10, DN19 and DN25, optional with plug couplers DN10 to
        DN31
        Nominal pressure: PN100 to PN500
        Measuring range: max. 400 l/min and 400 bar respectively

      MID-EX-C

        Compact and robust flow transducer for small flow rate to connect with a
        Kirchgaesser evaluation and/or display unit or signal converter
        respectively
        Nominal width: DN10, DN19 and DN25, optional with plug couplers DN10 to
        DN31
        Nominal pressure: PN100 to PN500
        Measuring range: max. 400 l/min and 400 bar respectively

      MID-EX-GC

        Compact and robust flow transducer for high flow rate to connect with a
        Kirchgaesser evaluation and/or display unit or signal converter
        respectively
        Nominal width: DN50 to DN300, optional with high pressure couplings
        Nominal pressure: PN10 to PN160
        Measuring range: max. 1000 l/min and 2000 m³/h respectively

      MULTIMIDEX

        Compact four channel flow meter
        Signal outputs: frequency, serial, CAN
        Nominal width: DN12
        Nominal pressure: PN100
        Measuring range: 0 - 50 l/min

Pressure meter
      PEMEX-E

        Digital local display
        Max. 2 output signals （frequency 5 - 15 Hz, limit）
        Measuring range: max. 1000 bar
        Process connection, sensor:
        - Pipe thread G1¼, flush-mounted ceramic sensor or
        - Pipe thread G½, internal ceramic sensor or
        - Pipe thread G½, flush-mounted thinfilm sensor or
        - Pipe thread G½, internal thinfilm sensor or
        - Socket nipple DN10 （acc. to DIN 20043）, thinfilm sensor

      PEMEX-LC

        Compact pressure meter
        Output signal:
        - Frequency 5 - 15 Hz or
        - Voltage 1 - 5 V or 1 - 10 V
        Measuring ranges:
        Selectable in the range of 0 - 40 mbar to 0 - 1000 bar acc. to the table
        of versions （other measuring ranges are available on request）
        Process connection, sensor:
        - Pipe thread G1¼, flush-mounted ceramic sensor or
        - Pipe thread G½, internal ceramic sensor or
        - Pipe thread G½, flush-mounted thinfilm sensor or
        - Pipe thread G½, internal thinfilm sensor or
        - Socket nipple DN10 （acc. to DIN 20043）, thinfilm sensor

      PEM-EX-C

        Compact pressure transducer for connection to a Kirchgaesser evaluation
        and/or display unit or signal converter respectively
        Measuring ranges:
        Selectable in the range of 0 - 40 mbar to 0 - 1000 bar acc. to the table
        of versions （other measuring ranges are available on request）
        Process connection, sensor:
        - Pipe thread G1¼, flush-mounted ceramic sensor or
        - Pipe thread G½, internal ceramic sensor or
        - Pipe thread G½, flush-mounted thinfilm sensor or
        - Pipe thread G½, internal thinfilm sensor or
        - Pipe thread G¼, internal thinfilm sensor or
        - Socket nipple DN10 （acc. to DIN 20043）, thinfilm sensor

Temperature meter
      TEMEX

        Digital local display
        Max. 2 output signals （frequency 5 - 15 Hz, limit）
        Measuring range:
        -20°C to +70°C （quartz sensor） or
        -20°C to +150°C （semiconductor sensor）
        Various programmable functions like:
        - Limit detection
        - Simulation of measuring value
        - Error diagnosis

      TEM-EX-C

        Compact temperature transducer for connection to a Kirchgaesser
        evaluation and/or display unit or signal converter respectively
        Measuring range:
        Selectable in the range of -20°C to +150°C acc. to the table of versions
        （other measuring ranges are available on request）
        Process connection:
        - Thread G½
        - Selectable length of sensor

Level meter
      RASOMEX

        Measuring principle: Radar
        Output signal:
        - Frequency 5 - 15 Hz or
        - Current 4 - 20 mA or
        - Voltage 0.4 - 2.0 V or
        - Voltage 1 - 5 V or
        - Voltage 1 - 10 V and
        - Alarm output （potential-free optocoupler）
        Measuring range: max. 70 m
        Microprocessor-controlled evaluation unit RASOMEX-S with remote display
        and operation unit RASOMEX-A

      UMINEX

        Measuring principle: Ultrasonic
        Output signal:
        - Frequency 5 - 15 Hz
        - Max. 3 programmable relay outputs
        Evaluation unit with LC-display
        Measuring range: max. 3 m for solids and 8 m for liquids

      PEMEX-BS

        evaluation unit PEMEX-BSA with remote transducer PEMEX-BSS
        Level measuring in pressureless （deep） springs or in water towers
        Measuring range: 0 - 10 m to 0 - 250 m
        Max. cable length of transducer: 2000 m
        Microprocessor-controlled evaluation unit with following features:
        - Memory for up to 35 measuring values
        - Power supply with （rechargeable） batteries （4x type AA）
        - Internal LC-display
        - Serial interface to transfer measuring values to PC
        - Software to transfer measuring values to Microsoft Excel®

      ULTRAMEX

        This measuring device was replaced by the new level meter RASOMEX.

Magnetic-inductive flow monitor
      FLUWEX-A with MXR

        Digital local display
        Max. 2 signal outputs （e.g. frequency 5 - 15 Hz）
        Measuring range: 0 - 5 m/s
        Extensive functionality like
        - Limit generation
        - Simulation of the measuring value
        - Error diagnosis

Particle meter
      PARTIMEX

        Digital local display
        Output signal:
        - Frequency 5 - 15 Hz,
        - Current 4 - 20 mA or
        - Voltage 0.4 - 2.0 V and
        - Max. three programmable optocoupler outputs
        Measuring range （level of intensity）:
        10 to 100 （detection of particles < 5 µm）
        Wide functionality like
        - Limit detection
        - Simulation of measuring values
        - Remote diagnosis

Microwave barrier
      SOLWEX20

        Features:
        - LED field strength display
        - Selectable pull-in/drop-out delay
        - Current monitoring of emitter/receiver
        Output signals:
        - 3 optocoupler outputs （switching and alarm）
        - Max. 2 optional relay outputs （change-over contact）
        Detection range: max. 20 m

Control systems
      AQUACONEX

        Cooling water control for up to two motor circuits
        Signal outputs:
        Frequency 5 - 15 Hz, pulse or limit （programmable） and one relay contact
        （change-over switch）
        Measuring range: 0 - 30 l/min （per circuit）
        Different maintenance and cleaning facilities

Microwave barrier
      FDR50/FQR50

        Contact-free detection of all types of bulk solids
        Suitable as level limit switch and for counting bulk solids
        Detection range: max. 20 m
        Process connection:
        - Thread R1½ （EN 10226） or
        - Thread 1½ NPT （ANSI/ASME B1.20.1）
        Conforms to:
        - ATEX II 1/2D
        - ATEX II 1/2GD
        - IECEx

      Switching amplifier FTR325

        1-channel switching amplifier for the microwave barrier FDR50/FQR50
        High level of operational safety through line monitoring up to the
sensor
        LED display of operating and switching state
        Selectable pick up and/or drop out delay of the switching output
        Compact housing for easy inline mounting on standard rack rails

Level meter
      FMM50

        Electromechanical level measuring system for heavy-weight grained bulk
        solids and for liquids
        Traction power: max. 500 N
        Output signal:
        - Current 0/4 - 20 mA and
        - Max. 6 programmable relays
        Measuring range: max. 70 m
        Power supply:
        180 - 253 VAC, 50/60 Hz or 90 - 127 VAC, 50/60 Hz
        Optional design with certification for applications in areas subject to
        dust explosion hazard zones 20, 21 and 22, category 1/2D

      FMM20

        Electromechanical level measuring system for lightweight grained bulk
        solids and for liquids
        Traction power: max. 150 N
        Output signal:
        - Current 0/4 - 20 mA and
        - Max. 4 programmable relays
        Measuring range: max. 32 m
        Power supply: 90 - 253 VAC, 50/60 Hz or 20 - 28 VDC
        Optional design with certification for applications in areas subject to
        dust explosion hazard zones 20, 21 and 22, category 1/2D

 
      COMBA-EX

        Evaluation and display unit for up to 4 transducers
        Possible transducers:
        - PEM-EX-C （pressure） and/or
        - TEM-EX-C （temperature） and/or
        - MID-EX-C （small flow） and/or
        - MID-EX-GC （high flow）
        Automatical detection of the connected transducers （type and measuring
        range）
        Output signal:
        Frequency 5 - 15 Hz
        No parameterizing or programming required
        Maintenance-free

      MID-EX-C

        Compact small flow transducer to connect with a Kirchgaesser evaluation
        and/or display unit or signal converter respectively
        Measuring range: max. 400 l/min
        Nominal width: DN10, DN19 and DN25,
        optional with plug couplers DN10 to DN31
        Nominal pressure: PN100 to PN500

      MID-EX-GC

        Compact high flow transducer to connect with a Kirchgaesser evaluation
        and/or display unit or signal converter respectively
        Measuring range:
        max. 1000 l/min and 2000 m³/h respectively
        Nominal width:
        DN50 to DN300, optional with high pressure couplings
        Nominal pressure: PN10 to PN160

      PEM-EX-C

        Compact pressure transducer to connect with a Kirchgaesser evaluation
        and/or display unit or signal converter respectively
        Measuring ranges:
        Selectable in the range of 0 - 40 mbar to 0 - 1000 bar acc. to the table
        of versions （other measuring ranges are available on request）
        Various process connections

      TEM-EX-C

        Compact temperature transducer to connect with a Kirchgaesser evaluation
        and/or display unit or signal converter respectively
        Measuring ranges:
        Selectable in the range of -20°C to +150°C acc. to the table of versions
        （other measuring ranges are available on request）
        Process connection:
        - Thread G½
        - Selectable length of sensor

報價快速，*，貨期短！

恒遠安諾科技有限公司

錢

：

：

：1095688308